[Sep-2019]200-355 PDF 593Q Free Shared by Braindump2go(New Questions)

Sep/2019 Braindump2go 200-355 Exam Dumps with PDF and VCE New Updated Today! Following are some new 200-355 Real Exam Questions!

1.|2019 Latest Braindump2go 200-355 Exam Dumps (VCE & PDF) Instant Download:


2.|2019 Latest Braindump2go 200-355 Exam Questions & Answers Instant Download:


New Questions
What authentication method requires a certificate on both the client and authentication server?


Answer: B

New Questions
An enterprise needs their iPhones to connect to the EAP-TLS network. How should the devices be configured?

A. push profile and certificate through Configuration Utility
B. configure directly through Settings application
C. email certificate to device then configure through Settings application
D. download certificate from web page then configure through Settings application
E. push profile and certificate through iTunes

Answer: A

New Questions
What AnyConnect module can be used to provide a detailed scan list of the Wi-Fi environment?

B. Telemetry
C. Web Security
E. Posture

Answer: A

New Questions
What two capabilities would be present on a wireless client device that supports CCXv3? (Choose two.)

B. 802.1x

Answer: AB

New Questions
To mitigate DoS attacks on a network, what security method should be implemented?

B. 802.1x
C. Non-broadcast SSID
D. Client MFP

Answer: D

New Questions
What protocol overcomes the weaknesses of LEAP?


Answer: C

New Questions
What encryption standards describe WPA and WPA2?

A. WPA mandates AES with TKIP optional, WPA2 mandates TKIP
B. WPA mandates TKIP with AES optional, WPA2 mandates AES
C. WPA mandates CKIP, WPA2 mandates AES
D. WPA mandates CKIP with AES optimal, WPA2 mandates AES

Answer: B

New Questions
What two methods of authentication are available for Local EAP?

B. Local and RADIUS
C. Local Only
D. LDAP and Local

Answer: D

New Questions
What three components must be the same on a controller and the RADIUS server when adding a RADIUS server to a WLC? (Choose three.)

A. Username
B. Shared Secret
C. Index Priority
D. Port Number
E. IP Address
F. Network Mask

Answer: BDE

New Questions
An engineer wants to setup WPA2 Enterprise using EAP-TLS and a remote RADIUS server. What device (s) would the engineer specify the EAP type on?

A. the supplicant and authentication server
B. the supplicant and authenticator
C. the authenticator and authentication server
D. the supplicant only
E. the authentication server only

Answer: A

New Questions
What three characteristics are components of mobility anchoring? (Choose three.)

A. enabled as a global setting
B. enabled on a per WLAN basis
C. restricts clients to a specific subnet
D. client traffic is tunneled to predefined WLC(s)
E. only one mobility anchor is allowed per WLAN
F. acts as master controller for a mobility group

Answer: BCD

New Questions
Which of the following are three functions of Cisco RRM? (Choose three.)

B. intercontroller roaming
C. dynamic channel assignment
D. intracontroller roaming
E. coverage hole detection

Answer: ACE
RRM can periodically reconfigure the 802.11 RF network for best efficiency.
To do this, RRM performs these functions:
Radio resource monitoring
Transmit power control
Dynamic channel assignment
Coverage hole detection and correction

New Questions
You are setting up a laptop to connect to the wireless network of your organization. The protocols that are used for the corporate network are WPA2 Enterprise, PEAP, and AES. Which three parameters do you need to configure in the Windows 7 wireless network properties for this connection? (Choose three.)

B. encryption type
C. authentication method
E. security type
F. IP address

Answer: BCE
On the Security tab, you can specify the following security types:
Based on the selected security type, you can configure either a network security key or specify and configure a network authentication method. If you specify WPA-Enterprise, WPA2-Enterprise, or 802.1x as your security type, you must configure the following (as shown in the previous figure):
If you specify the use of WPA-Personal or WPA2-Personal as your security type or No authentication (Open) or Shared as your security type with WEP as your encryption type, you must configure a network security key, as shown in Figure 10.

New Questions
What are three characteristics of the 802.11g standard? (Choose three.)

A. speed of as much as 11 Mb/s
B. speed of as much as 54 Mb/s
C. backward-compatibility with 802.11a
D. backward-compatibility with 802.11b
E. OFDM as an additional modulation technique
F. OFDM and CCK as additional modulation techniques

Answer: BDE
802.11g is the third modulation standard for wireless LANs. It works in the 2.4 GHz band (like 802.11b) but operates at a maximum raw data rate of 54 Mbit/s. Using the CSMA/CA transmission scheme, 31.4 Mbit/s [1] is the maximum net throughput possible for packets of 1500 bytes in size and a 54 Mbit/s wireless rate (identical to 802.11a core, except for some additional legacy overhead for backward compatibility). In practice, access points may not have an ideal implementation and may therefore not be able to achieve even 31.4 Mbit/s throughput with 1500 byte packets. 1500 bytes is the usual limit for packets on the Internet and therefore a relevant size to benchmark against. Smaller packets give even lower theoretical throughput, down to 3 Mbit/s using 54 Mbit/s rate and 64 byte packets. Also, the available throughput is shared between all stations transmitting, including the AP so both downstream and upstream traffic is limited to a shared total of 31.4 Mbit/s using 1500 byte packets and 54 Mbit/s rate. 802.11g hardware is fully backwards compatible with 802.11b hardware. Details of making b and g work well together occupied much of the lingering technical process. In an 802.11g network, however, the presence of a legacy 802.11b participant will significantly reduce the speed of the overall 802.11g network. Some 802.11g routers employ a back-compatible mode for 802.11b clients called 54g LRS (Limited Rate Support). [2]
The modulation scheme used in 802.11g is orthogonal frequency-division multiplexing (OFDM) copied from 802.11a with data rates of 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s, and reverts to CCK (like the 802.11b standard) for 5.5 and 11 Mbit/s and DBPSK/DQPSK+DSSS for 1 and 2 Mbit/s. Even though 802.11g operates in the same frequency band as 802.11b, it can achieve higher data rates because of its heritage to 802.11a.

New Questions
Which two types of encryption does Windows support for WPA2 security for wireless connections? (Choose two.)


Answer: AD
TKIP and AES are two different types of encryption that can be used by a Wi-Fi network. TKIP stands for “Temporal Key Integrity Protocol.” It was a stopgap encryption protocol introduced with WPA to replace the very-insecure WEP encryption at the time. TKIP is actually quite similar to WEP encryption. TKIP is no longer considered secure, and is now deprecated. In other words, you shouldn’t be using it.
AES stands for “Advanced Encryption Standard.” This was a more secure encryption protocol introduced with WPA2, which replaced the interim WPA standard. AES isn’t some creaky standard developed specifically for Wi-Fi networks; it’s a serious worldwide encryption standard that’s even been adopted by the US government. For example, when you encrypt a hard drive with TrueCrypt, it can use AES encryption for that. AES is generally considered quite secure, and the main weaknesses would be brute-force attacks (prevented by using a strong passphrase) and security weaknesses in other aspects of WPA2.

New Questions
Refer to the exhibit. Which three switch port types are valid for these connections? (Choose three.)

A. access
B. port-channel
C. port-channel trunk
D. trunk
E. port-channel access
F. routed port

Answer: ACD
The switch must be configured for access or trunks to the WLC, and using trunks over port channel interfaces is supported.

New Questions
Which two wireless technologies can interfere with 802.11 networks? (Choose two.)

B. ZigBee
C. WiMax

Answer: AB
Digital Enhanced Cordless Telecommunication (DECT), also known as cordless telephones, and Zigbee are both well-known sources of interferences within an 802.11 network.

New Questions
Which two algorithms are available in RRM? (Choose two.)

A. coverage-hole detection
B. dynamic channel assignment
C. RSSI normalizer
D. transmitting channel expander
E. rogue detection

Answer: AB
Here is how Cisco RRM works from a high level:
What are the algorithms that the RF Group Leader will be busy with?

New Questions
Which two pieces of information are needed for the wireless client to connect to the wireless network? (Choose two.)

B. security settings
C. channel number
D. AP name

Answer: AB
Most clients enable you to associate to a detected network (broadcasted SSID) or configure a specific profile. In all cases, you must configure the network name (SSID), the operating mode (ad-hoc or infrastructure), and some security settings (that will be different depending on whether the SSID uses Pre-Shared Key Security or Enterprise [EAP/802.1x] security).

New Questions
What are two wireless configuration utilities for Apple Mac computers? (Choose two.)

A. AirPort
B. AirPort Extreme
C. AirManager
D. AirManager Supreme
E. AirAssistant Ultimate

Answer: AB
AirPort (for 802.11b) and AirPort Extreme (for 802.11b/g/n or 802.11a/b/g/n) are WLAN configuration utilities from Apple. The utility allows the creation of network profiles, association to detected networks, and advanced configuration and troubleshooting. The wireless card can be disabled or enabled from the utility main window.

New Questions
What are two modules of the CCX Lite program? (Choose two.)

A. foundation
B. voice
C. RF power
D. roaming

Answer: AB
In summer 2011, Cisco separated the CCX features into four subfamilies to help vendors integrate only those features that are needed for their specific wireless clients (called application-specific devices, which are devices built for a specific function [for example, barcode scanners or VoWLAN phones] and therefore do not need all the CCX features that a data laptop would need). This is called the CCX Lite program, with four components:

New Questions
What are two security threats to wireless networks? (Choose two.)

A. ad-hoc networks
B. client misassociation
C. port redirection
D. cross-site scripting

Answer: AB
An ad hoc network is a collection of wireless clients that form a network amongst themselves without the use of an AP. As far as network administrators are concerned, ad hoc wireless networks are uncontrolled. If they do not use encryption, they may expose sensitive data to outside eavesdroppers. If a device is connected to a wired network and has bridging enabled, an ad-hoc network may also function like a rogue AP. Additionally, ad-hoc networks can expose client devices to viruses and other security vulnerabilities. For these reasons, many administrators choose to prohibit ad-hoc networks.
Valid Client Misassociation:
This feature does not detect attacks, but rather it monitors authorized (valid) wireless clients and their association within the network. Valid client misassociation is potentially dangerous to network security. The four types of misassociation that we monitor are:


1.|2019 Latest Braindump2go 200-355 Exam Dumps (VCE & PDF) Instant Download:


2.|2019 Latest Braindump2go 200-355 Study Guide Video Instant Download:


Braindump2go Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99/$49.99
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back

Comments are closed.